Home | Download Catalog | Inquiries | Search
 
 
Unidapt System: Countersinks:  Countersink (Metric)
 


These Countersink inserts are for use with the Unidapt Adapter or Morse Taper Sleeves. This 82° angle countersink is designed to allow sufficient clearance for drill and chamfering for flat head and oval head screws in a single operation.

Order No. Metric Screw Drill Dia. D Body Dia. C Pilot Length H O.A.L. L Taper Length F
71L5 500 3mm 3.10 6.20 8.73 31.75 11.11
71L5 501 4mm 4.10 8.20 11.90 41.27 14.29
71L5 502 5mm 5.10 10.20 12.70 41.27 14.29
71L5 503 6mm 6.10 12.20 13.49 45.24 14.29
71L5 504 8mm 8.10 16.20 18.25 53.97 15.87
71L5 505 10mm 10.10 20.20 21.43 63.50 15.87
71L5 506 12mm 12.10 24.20 23.81 76.20 15.87
 

Information presented in this brochure is for informational purposes only. Link Industries reserves the right to make changes, alterations and substitutions to the products, services or other information presented in
this brochure without prior notice. For the latest information contact Link Industries.

Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration.  Equipment must never be operated with safety equipment removed or disabled.
 

To Order Call 1-800-626-9460