Home | Download Catalog | Inquiries | Search

 
 
Unidapt System: Countersinks:  Unidapt Countersink (Eng)
 


These Countersink inserts are for use with the Unidapt Adapter or Morse Taper Sleeves. This 82
° angle countersink is designed to allow sufficient clearance for drill and chamfering for flat head and oval head screws in a single operation.

Order No. English Screw Drill Dia. D Body Dia. C Pilot Length H O.A.L.  L Taper Length F
65L2 285 #5 .127 5/16 11/32 1  1/4 7/16
65L2 286 #6 .140 5/16 11/32 1  1/4 7/16
65L2 287 #8 .166 7/16 15/32 1  5/8 9/16
65L2 288 #10 .192 7/16 15/32 1  5/8 9/16
65L2 289 #12 .220 7/16 1/2 1  21/32 9/16
65L2 290 1/4 .252 1/2 17/32 1  25/32 9/16
65L2 291 5/16 .315 5/8 21/32 2  1/8 5/8 
65L2 292 3/8 .378 3/4 25/32 2  1/2 Straight Shank
 

Information presented in this brochure is for informational purposes only. Link Industries reserves the right to make changes, alterations and substitutions to the products, services or other information presented in
this brochure without prior notice. For the latest information contact Link Industries.

Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration.  Equipment must never be operated with safety equipment removed or disabled.
 

To Order Call 1-800-626-9460